Dehumdifiers 

 

Timber Dryers 

 

Military Equipment 

 

WM150

Product Data

  Part Number
  10285GL-GB
  WM150
Height (mm) 680
Width (mm) 810
Depth (mm) 305
Weight(kgs) 75
Voltage 230
Phase 1
Frequency(Hz) 50
Power(kW) 1.5
Current(A) 8
Airflow(m3/hr) 580
Noise Level(dba) 58
Effective Volume(m3) 300
Typical Extraction(l/d) 30
Min Operating Temp (°C) 3
Max OperatingTemp (°C) 35
  Part Number
  10285GL-GB
  WM150
On/Off Control Via Humdistat Y
Compressor Type Recip
Reverse Cycle Defrost Y
Electronic Defrost Timer Y
Status Indicators Y
Wall Mounting Bracket Y
Rubber Anti Vibration Feet Y
Fan Speeds 1
Refrigerant Type R407c
Free Standing Y
Integral Condensate Pump Y
Air Filter Y
Moulded Mains Plug Y
Stoved Epoxy Finish Y
All Steel Construction Y
Part Number Description
   
  Part Number
  10285GL-GB
WM150
Brochure
Manual
Wiring Diagram
Wiring Schematic
Spare Parts List

PROVEN PERFORMANCE

Whatever your drying requirements, EIP dehumidifiers have the answer. All units operate effectively across a broad range of temperatures and can provide, low levels of relative humidity when required.

EIPL

The WM range of industrial and commercial dehumidifiers have been developed by EIPL, we are internationally renowned experts in the field of dehumidification technology

THE PROBLEM

Excess humidity in your warehouse, office factory or shop results in corrosion, mould growth and rotting. Enormous costs are incurred every year through damage to inventory and through inflated building maintenance costs as a result of dampness. Even if your building seems dry during the day, at night when the temperature falls the humidity rises and the condensation process begins.

THE DEHUMIDIFIER

EIPL dehumidifiers are effective solutions to environmental control problems. The WM range of units, are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray, which is equipped with an internal condensate pump for easy removal of collected moisture. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area. Because the WM range of units are equipped with an internal humidistat, they automatically switch on and off to save energy and expense by maintaining the desired level of humidity with intermittent operation.

APPLICATION

The EIPL WM range of dehumidifiers are an ideal solution for humidity control in a wide variety of applications including offices, apartments, stores, restaurants, bars, salons, museums, storerooms, computer and telecommunications rooms, garages, cellars and animal enclosures. Its also great for spa rooms in homes or hotels.