Dehumdifiers 

 

Timber Dryers 

 

Military Equipment 

 

PD120

Product Data

  Part Number
  1028225
  PD120
Height (mm) 441
Width (mm) 683
Depth (mm) 658
Weight(kgs) 70/td>
Voltage 230
Phase 1
Frequency(Hz) 50
Power(kW) 1.5
Current(A) 6
Airflow(m3/hr) 850
Noise Level(dba) 60
Effective Volume(m3) 300
Typical Extraction(l/d) 30
Min Operating Temp (°C) 3
Max OperatingTemp (°C) 35
  Part Number
  1028225
  PD120
On/Off Control Via Humdistat Y
Reverse Cycle Defrost Y
Electronic Defrost Timer Y
Temperature Sensative Defrost Y
Remote Humidistat Facility Y
Refrigerant Type R407c
High Capacity Centrifugal Fan Y
Fan Speeds 2
Quiet Operation Y
Suspend Above Celings Y
Duct Mounting Flanges O
Low Voltage Controls Y
Stoved Epoxy Finish Y
All Steel Construction Y
Part Number Description
   
  Part Number
  1028225
PD120
Brochure
Manual
Wiring Diagram
Wiring Schematic
Spare Parts List

WHY THE NEED FOR A DEHUMIDIFIER?

Dehumidifiers are required wherever there is a need to lower the humidity level to prevent corrosion, mould growth and condensation or maintain a low humidity condition during manufacture, packaging or storing of hygroscopic products.

THE DEHUMIDIFIER

The PD range of units, are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray, which is equipped with an internal condensate pump for easy removal of collected moisture. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area. When used in conjunction with an external humidistat, the PD range of units automatically switch on and off to maintain the desired humidity level.

WHY CHOOSE EIPL?

With over thirty seven years of experience, EIPL is Europe’s leading manufacturer of dehumidifiers and the name you can rely on. No matter how extreme the conditions EIPL’s efficiency copes comfortably even at the coldest temperatures.

PD120 & PD200

The EIPL PD range of dehumidifiers are high capacity units ideal where large volumes of water and moisture need to be removed efficiently and quietly. With a maximum extraction of 75lts per day the PD120 and 120lts per day for the PD200, is the ideal choice for many applications. With 41 years of engineering experience, EIPL always ensures the maximum performance with minimum energy consumption. All components have been carefully selected inorder to maintain the EIPL high build standard, which consequently delivers high quality, reliable products.The versatile PD120 and PD200 units, incorporate an adjustable speed fan, providing the flexibility for direct or ducted applications. The low voltage, remote humidistat control circuit makes the equipment easy and safe to install in the most complex installations. The quiet operation of the PD120 and PD200 units, makes them ideal for Restaurants, Swimming Pools, Libraries etc, where high noise is prohibited. Both the PD120 and PD200 incorporate a temperature sensitive, reverse cycle defrost system. The temperatures sensitive ensure defrosts on occur when required and the reverse cycle defrost ensures any defrost period is short and effective, thereby increasing the overall drying capacity. The Heat pump design of the PD refrigeration system means there is no heat loss in the dehumidifying process, thereby saving energy consumption.