Dehumdifiers 

 

Timber Dryers 

 

Military Equipment 

 

MF4S

Product Data

  Part Number
  1330500
  MF4S
Height (mm) 1.535
Width (mm) 1,100
Depth (mm) 460
Weight(kgs) 190
Voltage 415
Phase 3
Frequency(Hz) 50
Total Power(kW) 16
Airflow(m3/hr) 6,000
Drying Power(KW) 6
Heating Power(kW) 9
Max OperatingTemp (°C) 60
Max Water Extraction (l/d) 300
   
Typical Drying Capacities
1" Hardwood (m3) 23.5
2" Hardwood (m3) 40.0
3" Hardwood (m3) 68.0
1" Softwood (m3) 12.0
2" Softwood (m3) 28.0
3" Softwood (m3) 45.0
   
  Part Number
  1330500
  MF4S
Compatible Controller BC / MCU
Stainless Steel Coils Y
High Performance Axial Fans Y
Stainless Steel Drain Tray Y
Stoved Epoxy Finish Y
All Steel Constuction Y
Part Number Description
1300019 Humidification System
1300012 BC2000 Wood Sensor Kit (5M)
1300013 BC2000 Wood Sensor Kit (10M)
2344700 BC2000 Thermo Hyrometer
3940200 Auxillary Fan - AV2
3941001 Auxillary Fan - AV3
1340100 Venting Unit
  Part Number
  1330500
MF4S
Brochure
Manual
Wiring Diagram
Wiring Schematic
Spare Parts List

Optimum Capacity

The normal rated capacity of the MF4S when drying 1” hardwood is 24m3. The units can be installed singularly or in multiples to provide drying capacity to match any need. The MF4S units are rugged, reliable wood drying systems designed for the larger wood retailer or sawmill needing regular supplies of thoroughly dried wood with minimal delay. Their Stainless Steel Coils make MF4S the ideal choice or drying OAK and other timbers which produce acetic Acid

Durability

The rigid tough frames are designed to cope with drying chamber conditions. Specially treated heat exchangers are used to prevent corrosion when drying species containing concentrations of acids, notably Oak.

Efficiency

EIPL MF4S wood dryers are installed inside the drying chamber. This means that all the heat produced as a by product of the drying functions can be recovered and re-used continually throughout the drying run. Running costs are, therefore, low, improving your profitability by reducing costs.

Compactness

Space inside the drying chamber is at a premium, so the MF4S dryers are slim in shape to allow maximum space for the wood being dried.

Performance

The MF4S dryers incorporate design features which will optimize operation in the temperature range up to 140˚F (60˚C). At this temperature the wood will release its moisture quickly and in safety. Operation at significantly higher temperatures requires specialized refrigerants and inevitably frequent servicing. EIPL wood dryers therefore, operate in the temperature range which is the best compromise between drying speed and machine reliability. The design of the MF4S allows each unit to operate effectively at low relative humidity levels. This means that you can be sure your wood is thoroughly dried to low moisture contents, 6% if required.

Expandable

If your need for dried wood grows, so can your drying system. Users can start with a single MF unit and add more later. This arrangement means less strain on your cash flow without the danger of installing a drying system which becomes too small.

Control

MF4S wood drying systems are controlled by the EIPL MCU modular controllers, including microprocessor driven, fully programmable systems. This means that drying is accurately controlled, and you can be certain of high quality dried wood.

Full Feature Systems

In addition to the basic drying and heating functions, MF systems can incorporate a number of optional features from the EIPL range of supplementary equipment. To minimize further the modest running costs of MF units, drying chambers should be well insulated. Overheating in warm weather is prevented using the EIPL venting unit. To ensure even distribution of heat throughout the woodstack, it is necessary to install supplementary fans inside the drying chamber. EIPL can supply suitable fans from a range of specially selected models.